Wave Transformation and Load Reduction Using a Small Tandem Reef Breakwater ? Physical Model Tests
The performance of several small reef breakwaters, and a tandem breakwater system (consisting of a reef breakwater positioned upwave from a surface-piercing main breakwater), are quantified...

The Evolution of Breakwater Design
The purpose of this paper is to present a view of the evolution of both the rubble mound and vertical faced breakwaters from the earliest design through the Iribarren and Hudson era. Determining...

The Determination of Typhoon Design Wave By Synthetic Probibility Method
In summer and autumn, typhoons always take place in the northwest pacific. in the northern hemisphere, the typhoon is a large, anticlockwise, atmospheric eddy. Due to the strong wind speed,...

Hydraulic Properties of Surface Runoff on Ash-Mixed Concrete Pavement
The disposal of incinerated sludge ash from wastewater treatment plants is becoming an increasingly difficult problem in highly populated cities. The feasibility of reusing sludge ash...

Optimal Operation of Soil Aquifer Treatment System
Mathematical models based on nonlinear programming are developed for operating soil aquifer treatment(SAT) systems. The objective of these optimization models is to determine the operation...

Retaining and Flood Walls
The engineering manual Retaining and Flood Walls from the U.S. Army Corps of Engineers provides guidance for the safe design and economical...

Strategic Ship Routing Impacts of Temporal Coverage with Real-time Satellite Altimeter-Based Current Information
We investigate strategic ship routing impacts of temporal coverage with real-time satellite altimeter-based current information. We sample underlying daily `true' current patterns along...

Estimating Sediment Relative Density Using an Impact Core Sampler and Wave Equation-based Pile Analysis
This paper presents a case history in which soil sample drive resistance was modeled with a wave equation-based pile analysis computer program to estimate in situ sediment relative densities...

The Tip Displacement of Drilled Shafts in Sands
The design load of large diameter drilled shafts is determined so that the settlements do not exceed the values associated with the ultimate and serviceability limit states. Based on the...

Assessing Roughing Filtration Design Variables
Rural communities are affected by the surface water treatment rule and are looking for inexpensive filtration options which are easy to operate and maintain. This paper evaluates roughing...

Computing Two Dimensional Flood Propagation with a High Resolution Extension of McCormack's Method
McCormack's method, as applied for solving the bidimensional de Saint Venant equations is enhanced with the aid of the theory of Total Variation Diminishing (TVD) schemes in order to obtain...

Modelling of Flood Wave Propagation Over Flat Dry Areas of Complex Topography in Presence of Different Infrastructures
After a description of the general equations which govern the propagation of a 2D flood wave (shallow water equations), a review of the scientific publications on the integration of their...

New Methods for Modelling Dam-Break Wave
Recent developments in numerical analysis for hyperbolic equations have led to new methods which solve shallow water equations including complementary equations for hydraulic jumps. An...

Formation and Propagation of Steep Waves: An Investigative Experimental Interpretation
From the end of the last century, many Authors have studied experimentally the formation and the propagation of steep waves on dry flume bottom. Up to the present time, however, some aspects...

Free surface flow modelling on a complex topography
The aim of this paper is to describe the different construction stages and the validation of a free surface flow model on a complex topography. This model is based on the two dimensional...

Measurement of Turbulent Properties in a Natural System
Instruments designed to measure flow properties in stratified estuaries, lakes and oceans are reviewed. Emphasis is given to the measurement of turbulent fluxes and recent developments...

Laboratory and Field Evaluation of Acoustic Velocity Meters
A project is currently underway to evaluate the performance of 27 acoustic flowmeters used at Hoover, Davis, and Parker Dams on the lower Colorado River. Field surveys and laboratory testing...

Mapping 2-D and 3-D Velocity Components in Circular Conduits Using an Electromagnetic Current Meter and a 5-Hole Pilot Probe
The techniques presented in this paper facilitate the visualization of the two-dimensional and three-dimensional flow fields at arbitrary sections in a conduit. They have been used to...

Velocity and Turbulence Measurement from the Illinois and Mississippi Rivers
This paper presents a data measurement program that was used for collecting the velocity data associated with barge-tow traffic on the Illinois and Mississippi Rivers and includes a discussion...

Velocity Measurements by the One-Orange Method
Application of the most sophisticated instrumentation - so called state-of-the-art equipment - is not always necessary nor even desirable for measurement of mean velocities in verticals,...

 

 

 

 

Return to search